Table of contents
Product: Vinchin Backup & Recovery
Version: V9.0
KB Number: 300178
Last Modified: 2026-06-17 10:43:20
9.0.0.90995-SP2
What's New
| Module | Type | Description |
|---|---|---|
| System | New | Added [Full Backup Compensation] feature. |
| System | New | Added a display of the mount status to the network storage details under [Resource] > [Storage] > [Backup Storage]. |
| System | New | Added support for special characters when adding CIFS storage. |
| System | New | Log entries related to configuring or modifying the WORM feature have been added to the [System Log]. |
| Virtualization | New | Optimized the merge speed for large data in virtualization/cloud environments. |
| Virtualization | New | Added support for automatic addition of copies for virtual machines/cloud hosts/instances. |
| Virtualization | New | Added a secondary warning confirmation prompt when the virtualization synchronization interval is set too short. |
| Database | New | Added the ability to apply retention policies on object basis. |
| Database | New | Optimized the throttle policy for data backup jobs. |
| File | New | Optimized file archiving and backup, as well as data storage detection speed. |
| NAS | New | Added the SnapDiff backup and restore feature for Huawei OceanStor Dorado NAS snapshots. |
| Server | New | Fixed the issue where the restore job failed when restoring from a cloud storage backup point and enabling virus scanning. |
| Server | New | Fixed the issue where network reconnection failed during the execution of server backup jobs |
| CDP & Replication | New | Optimized the takeover and rollback functionality, and added support for breakpoint and downgrade. |
| CDP & Replication | New | Added a countdown prompt in the cache degradation log to restore the CDP mode. |
System
| Module | Type | Description |
|---|---|---|
| System | Fixed | Fixed an issue where report emails were not being sent on time. |
| System | Fixed | Fixed an issue where the statistics for “Total Backup” on the [Home] page, as well as “Total Protected VM Data” and “Today's Protected VM Data” on the [Data Visualization], were incorrect. |
| System | Fixed | Fixed an issue where filter options for [Current Jobs] and [History Jobs] were not being saved. |
| System | Fixed | Optimized the display of verification time for verified time points in the [Details] of [Data Resilience] – [Backup Data] time points. |
| System | Fixed | Optimized the [Refresh] functionality on the [Data Resilience] – [Backup Data] page. |
| System | Fixed | Optimized the display effect of viewing database backup time points by [Backup Object] on the [Data Management] – [Backup Data] page. |
| System | Fixed | Fixed an issue where the Linux client failed to come online properly after installation. |
| System | Fixed | Fixed an issue where the Windows client failed during cross-version online upgrades. |
| System | Fixed | Optimized the advanced search effect on the [Current jobs] page. |
| System | Fixed | Optimized the selectable options when sub-users create storage resource pools. |
| System | Fixed | Optimized the filtering effect of filters in the [Storage] report. |
| System | Fixed | Optimized backup point data statistics for multi-instance database hosts in the [Client] report. |
| System | Fixed | Fixed the search result display issue on the [Monitoring Center] – [Logs] – [System Operation Logs] page. |
| System | Fixed | Fixed the search result display issue on the [Monitoring Center] – [Alerts] – [Job Alerts] page. |
| System | Fixed | Optimized the differentiation of multi-instance information in the corresponding alarm details pop-up window under[Monitoring Center] – [Alerts] – [Job Alerts]. |
| System | Fixed | Optimized the data rendering effect of the network traffic graph on the [Home] page. |
| System | Fixed | Optimized the pop-up warning message when deleting a report. |
| System | Fixed | Fixed the issue where some report data was missing in notification emails. |
| System | Fixed | Fixed an issue where characters were incorrectly concatenated when editing the description of a report template in the [Reports] section. |
| System | Fixed | Fixed the abnormal search and filter functionality on the job report page in [Reports]. |
| System | Fixed | Fixed the reversed display ratio of the pie chart under [Monitoring Center] – [Reports] – [Overview]. |
| System | Fixed | Optimized the warning prompt for distribution operations in the [Throttling Policies] list interface. |
| System | Fixed | Optimized the node monitoring UI on the [Visualization Dashboard]. |
| System | Fixed | Fixed the issue where the search and clear buttons were unresponsive on the [Backup Storage] page. |
| System | Fixed | Fixed the search anomaly on the [Agents & Proxy] page. |
| System | Fixed | Fixed an issue where the “Select Verification Source” page did not display the copy replication point when creating a verification job. |
| System | Fixed | Fixed an issue where the WinPE boot image loaded slowly when using BIOS boot mode. |
| System | Fixed | Fixed the issue where the “Current Job” button did not properly navigate to other jobs. |
| System | Fixed | Optimized the behavior so that when restoring from a backup point selected on the [Data Resilience] > [Backup Data] page, the job associated with that point is now automatically selected. |
| System | Fixed | Fixed an issue where backup data imported from NFS storage into the original backup system was incorrectly associated with backup nodes. |
| System | Fixed | Fixed an issue with the display of the [Mount Status] for network storage (NFS/CIFS) after a backup node went offline. |
| System | Fixed | Fixed a sorting issue on the list page under [Resources] > [Storage] > [Backup Storage]. |
| System | Fixed | The options available under [Resources] > [Backup Resources] > [Backup Nodes] > [Cache Configuration] have been optimized. |
| System | Fixed | Optimized the display of backup nodes associated with storage locations for backup timestamps on the [Details] page under [Data Resilience] > [Backup Data] |
| System | Fixed | Optimized the logic for automatic switching of backup job storage. |
| System | Fixed | Added Excel as an export format on the [Resourcet] > [Infrastructure] > [Virtual Platform] page. |
| System | Fixed | Fixed a layout issue on the Home page for sub-users. |
| System | Fixed | Optimized file search results for granular recovery jobs. |
| System | Fixed | Optimized logging for virus management operations. |
| System | Fixed | Optimized the alert threshold settings for tape devices. |
| System | Fixed | Optimized log messages related to WORM policy settings in the [Job Log] of jobs. |
| System | Fixed | Fixed an issue where the [WORM Protection] status was not displayed correctly on the point-in-time details page after the point-in-time WORM policy expired. |
| System | Optimized | Fixed an issue with the display of the [Mount Status] for network storage (NFS/CIFS) after a backup node went offline. |
| System | Optimized | Fixed a sorting issue on the list page under [Resources] > [Storage] > [Backup Storage]. |
| System | Optimized | The options available under [Resources] > [Backup Resources] > [Backup Nodes] > [Cache Configuration] have been optimized. |
| System | Optimized | Optimized the display of backup nodes associated with storage locations for backup timestamps on the [Details] page under [Data Resilience] > [Backup Data] |
| System | Optimized | Optimized the logic for automatic switching of backup job storage. |
| System | Optimized | Added Excel as an export format on the [Resourcet] > [Infrastructure] > [Virtual Platform] page. |
| System | Optimized | Fixed a layout issue on the Home page for sub-users. |
| System | Optimized | Optimized file search results for granular recovery jobs. |
| System | Optimized | Optimized logging for virus management operations. |
| System | Optimized | Optimized the alert threshold settings for tape devices. |
| System | Optimized | Optimized log messages related to WORM policy settings in the [Job Log] of jobs. |
| System | Optimized | Fixed an issue where the [WORM Protection] status was not displayed correctly on the point-in-time details page after the point-in-time WORM policy expired. |
| System | Optimized | Optimized the modification logic for backup system jobs; when modifying a job, the [Submit] button is now only available on the final configuration confirmation page. |
| System | Optimized | Optimized the error message displayed when a backup system upgrade fails due to insufficient disk space. |
| System | Optimized | Optimized the automatic loading logic for client disk drives. |
| System | Optimized | Optimized the logic for modifying the mount point of backup nodes for network storage (NFS/CIFS) associated with jobs. |
| System | Optimized | Optimized the performance of advanced recovery processing in the backup system. |
| System | Optimized | Optimized the association between network storage (NFS/CIFS) and backup nodes. |
| System | Optimized | Optimized the available range of options when adding network storage (NFS/CIFS). |
| System | Optimized | Optimized the operations for adding and modifying network storage (NFS/CIFS). |
| System | Optimized | Optimized page loading performance. |
| System | Optimized | Optimized the interaction effects of the job operation buttons on the [Monitoring Center] > [Current Jobs] page. |
| System | Optimized | Optimized the page prompt message when enabling WORM for cloud storage. |
| System | Optimized | Optimized the cloud storage addition logic to support adding custom regions and virtual domains (third-level directories). |
| System | Optimized | The spelling of the ClamAV virus database has been corrected on the [Resource] > [Backup Resources] > [Virus Database Management] page. |
| System | Optimized | Optimized the virus scanning logic in the backup system’s business modules to improve scanning performance. |
| System | Optimized | Optimized log messages displayed when virus database updates fail. |
| System | Added | [Tape Management] now includes a feature to freeze and unfreeze backup sets. You can view the mapping between data and tapes on the [Data] page. |
| System | Added | Added a virus scan engine selection option to the task configuration; each task can use a different scan engine. |
| System | Added | Log entries related to configuring or modifying the WORM feature have been added to the [System Log]. |
| System | Added | [Monitoring Center] > [System] > [Network Flow] now includes a view for aggregated network interface traffic data. |
| System | Added | Added support for DELL Data Domain Boost storage. |
| System | Added | Added the ability to call the backup system's RESTful API using an API key. |
| System | Added | The backup system upgrade has added support for detecting tasks in abnormal states. |
| System | Added | Added support for special characters when adding CIFS storage. |
| System | Added | Added [Full Backup Compensation] feature. |
| System | Added | Added a display of the mount status to the network storage details under [Resource] > [Storage] > [Backup Storage]. |
Virtualization
| Module | Type | Description |
|---|---|---|
| Virtualization | Fixed | Optimized the retrieval of the virtual machine operating system selection list during ZStack ZSphere recovery. |
| Virtualization | Fixed | Fixed an issue where the VMware transfer mode was downgraded. |
| Virtualization | Fixed | Optimized the retrieval of virtual machine operating system version information during cross-platform server recovery to VMware. |
| Virtualization | Fixed | Optimized the sorting of backup data under 【Resources】-【Storage】-【Tape Management】-【Data】. |
| Virtualization | Fixed | Fixed an issue where backup jobs failed to switch storage targets. |
| Virtualization | Fixed | Optimized the calculation method for the number of licensed virtual machines under quantity-based licensing. |
| Virtualization | Fixed | Fixed an issue where recovery jobs could not be created when shared storage was mounted to multiple nodes but some nodes were offline. |
| Virtualization | Fixed | Fixed an issue where certain virtual machines recovered to HCI could not be modified directly on the HCI platform. |
| Virtualization | Fixed | Added support for using standard user accounts for recovery in ZStack ZSphere. |
| Virtualization | Fixed | Optimized the display of 【Run Logs】 under 【History jobs】 for virtual machine backups. |
| Virtualization | Fixed | Optimized the run logs for degraded backup jobs on Sangfor SCP. |
| Virtualization | Fixed | Optimized the capability for backing up Huawei FusionCompute to tape. |
| Virtualization | Fixed | Fixed an issue where Cross-Platform Recovery to ARM architecture SCP would fail. |
| Virtualization | Fixed | Fixed an issue where uploading local virtual machine backup copy data to Azure cloud would fail. |
| Virtualization | Fixed | Optimized the automatic fstab repair process during recovery for virtual machines with different disk bus types. |
| Virtualization | Fixed | Fixed an issue where instant recovery tasks would fail when the number of host storage volumes on Huawei FusionCompute exceeded 100. |
| Virtualization | Fixed | Added support for excluding independent disks in VMware backup. |
| Virtualization | Fixed | Optimized the recovery process for VMware virtual machines with more than 7 disks. |
| Virtualization | Fixed | [DR Lab] Added compatibility for certain special characters in virtual machine names. |
| Virtualization | Fixed | Fixed an issue where task status displayed abnormally after partial virtual machine backup/restoration failures in VMware backup/recovery tasks. |
| Virtualization | Fixed | Fixed an issue with Sangfor SCP where failure to create a storage snapshot using EC2 backup prevented the subsequent creation of disk snapshots. |
| Virtualization | Fixed | Optimized the [Web Download] feature for granular recovery. |
| Virtualization | Fixed | Optimized the operational capabilities for suspended granular recovery jobs. |
| Virtualization | Fixed | Optimized the display of file search results in granular recovery jobs. |
| Virtualization | Fixed | Optimized the update logic for virtual machine names on the backup data page after modification. |
| Virtualization | Fixed | Added restrictions on memory size input during H3C recovery. |
| Virtualization | Fixed | Fixed an issue where the Start button could still be clicked when a cross-platform recovery task was in the Stopping state. |
| Virtualization | Optimized | Optimized the retrieval of the 【Operating System Type】 / 【Operating System Version】selection list during VMware recovery. |
| Virtualization | Optimized | Added the capability to enforce retention policies based on objects for virtualization/private cloud/public cloud backup jobs. |
| Virtualization | Optimized | Optimized the merge speed for large data in virtualization/cloud environments. |
| Virtualization | Optimized | Improved backup source retrieval efficiency. |
| Virtualization | Optimized | Optimized the sorting of the Operating System Version selection in recovery jobs. |
| Virtualization | Optimized | Added special character restrictions for virtual machine names during Huawei FusionCompute recovery. |
| Virtualization | Optimized | Optimized the pop-up notification message when virtual machine names or disk names do not comply with naming conventions. |
| Virtualization | Optimized | Optimized the virtual machine migration task to support clicking [Complete Migration] after data transfer is finished. |
| Virtualization | Optimized | Optimized the search display method based on virtual machine name during recovery. |
| Virtualization | Added | Added support for automatic addition of copies for virtual machines/cloud hosts/instances. |
| Virtualization | Added | Added a secondary warning confirmation prompt when the virtualization synchronization interval is set too short. |
Private Cloud
| Module | Type | Description |
|---|---|---|
| Private Cloud | Added | Optimized the prompt information when restoring to a specified OpenStack instance. |
| Private Cloud | Added | Added license mode for ZStack Cloud CPU core count. |
| Private Cloud | Fixed | Optimized the display of the password verification box when restoring to a specified OpenStack instance. |
| Private Cloud | Fixed | Fixed an issue where the specified disk [Provisioning Mode] did not take effect during ZStack Cloud recovery. |
| Private Cloud | Fixed | Optimized the display of checkboxes when creating recovery tasks using backup points from different backup nodes. |
| Private Cloud | Fixed | Fixed an issue where manual task termination failed after a network anomaly during OpenStack SAN transport. |
| Private Cloud | Fixed | Added support for selecting an existing private cloud policy group when creating a private cloud backup task. |
Public Cloud
| Module | Type | Description |
|---|---|---|
| Public Cloud | Fixed | Fixed an issue with network anomalies during cross-platform recovery to AWS. |
| Public Cloud | Fixed | Fixed an issue causing abnormal jobs for server [Cross-Platform Recovery] to public clouds. |
Kubernetes
| Module | Type | Description |
|---|---|---|
| Kubernetes | Fixed | Optimized the display of job progress in the current job list. |
| Kubernetes | Fixed | Optimized the statistical method for [CPU (Cores)] count on the [Kubernetes Cluster] management page. |
| Kubernetes | Fixed | Optimized the [Integrity Check] feature. |
| Kubernetes | Optimized | Added support for stopping jobs during snapshot and instance creation. |
| Kubernetes | Fixed | Optimized the handling of residual data when backup storage space is insufficient. |
Files
| Module | Type | Description |
|---|---|---|
| Files | Fixed | Optimized the logic for copy jobs after enabling [WORM protection] on files. |
| Files | Fixed | Optimized the display of certain configuration details in file backup jobs. |
| Files | Fixed | Optimized backup data management functionality following cross-version upgrades. |
| Files | Fixed | Optimized the display of information in the [Job Details] for file backups when backing up to tape. |
| Files | Fixed | Optimized the processing logic for file backups when the backup destination is a NAS and storage space is insufficient. |
| Files | Fixed | Optimized the processing logic for backup jobs after the backup system license has expired. |
| Files | Optimized | Optimized file archiving and backup, as well as data storage detection speed. |
| Files | Optimized | Optimized background error logging related to file protection. |
| Files | Optimized | Optimized the logic for capacity-based licensing on the production side. |
NAS
| Module | Type | Description |
|---|---|---|
| NAS | Fixed | Optimized the task creation logic for licensing based on the number of NAS devices. |
| NAS | Fixed | Optimized the information display on the interface for adding/modifying NAS devices. |
| NAS | Optimized | Optimized the confirmation configuration and related job details display when creating NAS backup jobs with tape as the backup destination. |
| NAS | Optimized | Optimized the logic for capacity-based licensing on the production side. |
| NAS | Added | Added the SnapDiff backup and restore feature for Huawei OceanStor Dorado NAS snapshots. |
Hadoop
| Module | Type | Description |
|---|---|---|
| Hadoop | Optimized | Optimized the display of wait times for backup jobs and backup sources. |
| Hadoop | Optimized | Optimized the logic for capacity-based licensing on the production side. |
Server
| Module | Type | Description |
|---|---|---|
| Server | Optimized | Optimized the display of job logs during recovery. |
| Server | Fixed | Fixed the issue where integrity checks failed during server backup jobs when performing a full backup to CIFS storage. |
| Server | Fixed | Fixed the issue where network reconnection failed during the execution of server backup jobs |
| Server | Fixed | Fixed the issue where the system operation log did not record the specific type of time point when a time point was deleted. |
| Server | Fixed | Fixed the issue where the object type was displayed incorrectly in the job log for granular recovery jobs. |
| Server | Fixed | Fixed the issue where repeatedly clicking “Search” in the directory during granular recovery caused the search to fail. |
| Server | Fixed | Fixed the issue where the processed capacity was displayed incorrectly during volume backup. |
| Server | Fixed | Fixed the issue where the operating system version was not correctly identified during instant restore in UOS. |
| Server | Fixed | Fixed the issue where the recovery job failed when using automatic deployment to recover an ARM host. |
| Server | Fixed | Fixed the issue where host information was not displayed on the job details page when migrating an instant restore to a host. |
| Server | Fixed | Fixed the issue where the end time was displayed incorrectly in the history after stopping server backup jobs. |
| Server | Fixed | Fixed the issue where only some network adapter configurations took effect during instant restore on hosts with multiple network adapters. |
| Server | Fixed | Fixed the issue where embedded virtual machines lacked network adapter information after a Windows host was instant restored. |
| Server | Fixed | Fixed the issue where the restore job failed when restoring from a cloud storage backup point and enabling virus scanning. |
Database
| Module | Type | Description |
|---|---|---|
| Database | Fixed | Optimized the throttle policy for data backup jobs. |
| Database | Fixed | Opitimized the logic for matching the default time policy with the system's idle time window when creating jobs. |
| Database | Fixed | Fixed an issue where restore jobs were not subject to backup node resource limits. |
| Database | Fixed | Optimized the display in the [Restore Data Source] section. |
| Database | Fixed | Optimized the sorting of the list on the [Job] > [History Jobs] page. |
| Database | Fixed | Optimized the display of [Job Details] page. |
| Database | Fixed | Optimized the recognition of special characters in the Job Name when creating jobs. |
| Database | Fixed | Optimized the performance of cross-backup-chain recovery in Oracle databases. |
| Database | Fixed | Optimized the display of instance authentication information for DM Database clusters. |
| Database | Fixed | Optimized the execution of SQL verification scripts in PostgreSQL family database practice exercises. |
| Database | Fixed | Fixed the backup rollback logic for the PostgreSQL Patroni cluster. |
| Database | Fixed | Optimized the display of instance information for multi-instance VastBase databases. |
| Database | Fixed | Optimized the display of [Job Details] for jobs related to PostgreSQL family databases. |
| Database | Fixed | Optimized the execution logic of TiDB retention policies across jobs. |
| Database | Fixed | Optimized cluster information maintenance after TiDB cluster client goes offline. |
| Database | Opitimized | Opitimized the display of statistics in the lower-left corner of the backup point list under [Data Resilience]-[Backup Data]-[Details]. |
| Database | Opitimized | Opitimized the select operation in [Backup Source] when creating jobs. |
| Database | Opitimized | Optimized the modification logic for main jobs and sub-jobs in the Oracle database. |
| Database | Opitimized | Optimized error handling for PostgreSQL database clusters. |
| Database | Opitimized | Optimized the pre-backup verification steps for PostgreSQL family database. |
| Database | Added | Added the ability to apply retention policies on object basis. |
Object Storage
| Module | Type | Description |
|---|---|---|
| Object Storage | Optimized | Optimized the addition logic under [Infrastructure] > [Object Storage] to support the addition of virtual domains (third-level directories). |
| Object Storage | Optimized | Optimized the authorization logic based on production capacity. |
Application
| Module | Type | Description |
|---|---|---|
| Application | Optimized | Optimized the display of the [Job Retry] option in the Microsoft 365 module. |
| Application | Optimized | Optimized the display of license information for the Microsoft 365 module on the "System Licensing" page of the backup system. |
| Application | Optimized | Optimized the job execution logic when backup chain relationships are abnormal. |
| Application | Optimized | Optimized the display of the backup source page title. |
| Application | Fixed | Fixed an issue with email previews during Exchange recovery. |
| Application | Fixed | Optimized the responsiveness of the input fields in the backup source interface when modifying backup jobs. |
| Application | Fixed | Optimized the display of the “Spam Mail” interface. |
Copy & Archive
| Module | Type | Description |
|---|---|---|
| Copy & Archive | Fixed | Fixed an issue where copy jobs occasionally failed. |
| Copy & Archive | Optimized | Optimized the display of time controls for the [Throttling Policy] in copy jobs. |
| Copy & Archive | Fixed | Optimized the page display in the [Copy Source] list for copy jobs. |
| Copy & Archive | Fixed | Optimized the search functionality in the [Copy Source] section of copy jobs. |
| Copy & Archive | Fixed | Optimized the tooltip for selecting virtual machines when creating copy jobs. |
| Copy & Archive | Fixed | Fixed the execution logic of the retention policy for un-copied differential backup points in copy jobs. |
| Copy & Archive | Fixed | Optimized the process for manually setting WORM policy for copy points. |
| Copy & Archive | Fixed | Optimized the execution logic of associated copy jobs after switching storage in backup jobs. |
| Copy & Archive | Fixed | Optimized the selection display for database copy jobs in the [Select Copy Source] section. |
| Copy & Archive | Fixed | Optimized the search functionality for database instances in [Job Details] > [Database List] for copy and rollback jobs. |
| Copy & Archive | Fixed | Fixed a display issue with the instance and port on the [Details] page for database copy jobs. |
| Copy & Archive | Fixed | Optimized the display of retention policies on the [Confirm] page when creating a copy job. |
Verification
| Module | Type | Description |
|---|---|---|
| Verification | Fixed | Fixed an issue where the screenshot of the verification report in the email was blank. |
| Verification | Fixed | Fixed a display issue that occurred when creating a DR Lab. |
| Verification | Fixed | Fixed an issue with screenshots in sub node data verification jobs. |
| Verification | Fixed | Fixed the display of verification report timestamps for data verification jobs under [History Jobs]. |
| Verification | Fixed | Optimized the refresh effect on the list page under [Data Resilience] > [Verification] > [Verification Lab]. |
| Verification | Fixed | Optimized the prompt message in the [Verify at Specified Point in Time] section of verification jobs. |
| Verification | Fixed | Optimized the [Select Verification Source] page: after selecting a verification source, the verification targets are now displayed on the right side of the page. |
| Verification | Fixed | Fixed a display issue in the [Select Verification Source] list when creating a verification job using backup data from a multi-instance database. |
| Verification | Fixed | Optimized the point-in-time verification logic for verification jobs. |
| Verification | Fixed | Fixed an issue where verified objects were displayed repeatedly on the [Select Verification Source] page of verification jobs. |
| Verification | Fixed | Fixed a display issue on the [Select Backup Time Point] page that occurred when reselecting the time point type via a pop-up window while editing a verification job. |
| Verification | Fixed | Fixed the [Number of Concurrent Verification Objects] feature in verification jobs. |
| Verification | Fixed | Fixed an issue where the [Select Verification Source] section in verification jobs did not search based on specified criteria. |
| Verification | Fixed | Fixed an issue where the data verification report incorrectly displayed the text [Verification Screenshot]. |
| Verification | Fixed | Fixed an issue where invalid characters could be entered on the verification policy page when creating a new data job. |
| Verification | Fixed | Fixed an issue where the actual verification time for a verification job did not match the time set in the job settings. |
| Verification | Fixed | Fixed an issue where the [Integrity Check] option in [Verification Configuration] was disabled when creating a verification job. |
| Verification | Fixed | Fixed an issue where the [Maware Scan Policy] feature was not displayed on the [Select Verification Source] page for verification jobs. |
| Verification | Optimized | Optimized the [Maximum number of verification points] configuration on the [Time Point Type] selection page for verification jobs. |
| Verification | Optimized | Optimized the display of [Maware Scan] - “Number of Files” in verification reports. |
CDP & Replication
| Module | Type | Description |
|---|---|---|
| CDP & Replication | Fixed | Fixed an issue where the Kaspersky engine failed to detect viruses in paths containing Chinese characters. |
| CDP & Replication | Fixed | Fixed an issue where parameter error alert during the execution of embedded jobs. |
| CDP & Replication | Fixed | Fixed an issue where takeover incorrectly reported that licenses had been exhausted. |
| CDP & Replication | Fixed | Fixed an issue where an error dialog appeared when configuring a standby server for takeover job. |
| CDP & Replication | Fixed | Fixed an issue where, with granular recovery enabled, virus scanning incorrectly reported that a specific timestamp did not exist. |
| CDP & Replication | Fixed | Fixed an issue where MAC address settings did not take effect during takeover. |
| CDP & Replication | Fixed | Fixed an issue where the takeover button remained enabled even when unauthorized. |
| CDP & Replication | Fixed | Fixed an issue where storage and nodes could not be retrieved properly when configuring backup jobs. |
| CDP & Replication | Fixed | Fixed an issue where the communication IP was not automatically populated when modifying a job. |
| CDP & Replication | Fixed | Fixed an issue where duplicate page alerts appeared during the takeover configuration process. |
| CDP & Replication | Fixed | Fixed an issue where an error occurred when starting a job after disabling the active data backup configuration. |
| CDP & Replication | Fixed | Fixed an issue where resource monitoring configurations did not take effect on openEuler 22.03. |
| CDP & Replication | Fixed | Fixed a lag issue during the execution of embedded jobs in the C86 backup environment. |
| CDP & Replication | Fixed | Fixed an issue where the first backup on a clean Windows host required a retry to succeed after installing drivers. |
| CDP & Replication | Fixed | Fixed an issue where backup cluster switching did not take effect in the configuration of takeover jobs. |
| CDP & Replication | Fixed | Fixed an issue where the validation logic for the data protection detection interval was inconsistent in the rollback configuration. |
| CDP & Replication | Fixed | Fixed an issue where the position of the disk mapping dialog box for replication jobs was misaligned. |
| CDP & Replication | Fixed | Fixed an issue where data from the standby machine was not displayed correctly after a rollback job was stopped. |
| CDP & Replication | Fixed | Fixed an issue where the log in the job details was not updated in a timely manner. |
| CDP & Replication | Fixed | Fixed an issue where DNS configuration was lacking for embedded network cards. |
| CDP & Replication | Fixed | Fixed an issue where rolling label strategies were not taking effect. |
| CDP & Replication | Fixed | Fixed an issue where the takeover job details page's console redirect link was broken. |
| CDP & Replication | Fixed | Fixed an issue where the interface status was not updated after an email was sent. |
| CDP & Replication | Fixed | Fixed an issue where an expiring Oracle database password was incorrectly identified as a login failure. |
| CDP & Replication | Fixed | Fixed an issue where the SLE-12-SP3-SAP kernel driver failed to load. |
| CDP & Replication | Fixed | Fixed an issue where job names were displayed incorrectly on the backup data details page. |
| CDP & Replication | Fixed | Fixed an issue where job type filtering failed during emergency takeover. |
| CDP & Replication | Fixed | Fixed an issue where garbled characters appeared in the job log when a takeover was triggered by an application exception. |
| CDP & Replication | Fixed | Optimized the prompt text for server recovery jobs. |
| CDP & Replication | Fixed | Fixed an issue where the “Replication Disaster Recovery” option in the filter was not functioning. |
| CDP & Replication | Fixed | Fixed an issue where configuration items were not displayed completely in the rollback job details. |
| CDP & Replication | Fixed | Fixed an issue where automatic configuration filling for rollback jobs did not work, requiring manual reselection. |
| CDP & Replication | Fixed | Fixed an issue where repeatedly clicking during throttling policy configuration caused duplicate entries. |
| CDP & Replication | Fixed | Fixed an issue where the network adapter type was not set to VirtIO by default in the network configuration of embedded jobs. |
| CDP & Replication | Fixed | Fixed an issue where the backup set ownership was displayed incorrectly when viewing backup data by object. |
| CDP & Replication | Fixed | Fixed an issue where font display was inconsistent across stages of real-time and rollback jobs. |
| CDP & Replication | Fixed | Fixed an issue where the name of the server real-time job phase was incorrect. |
| CDP & Replication | Fixed | Fixed an issue where the default name of volume real-time protection recovery jobs was displayed incorrectly. |
| CDP & Replication | Fixed | Fixed an issue where combined filtering in the job list did not work. |
| CDP & Replication | Fixed | Fixed an issue where the traffic graph on the Recovery and Takeover pages was blank. |
| CDP & Replication | Fixed | Fixed an issue where driver detection was skipped when selecting a memory-based operating system for the standby machine during replication. |
| CDP & Replication | Fixed | Fixed an issue where the status display in the history job list was inconsistent. |
| CDP & Replication | Fixed | Fixed an issue where the operating system version was not retrieved in the verification object details. |
| CDP & Replication | Fixed | Fixed an issue where the heartbeat expiration time was not displayed in job details. |
| CDP & Replication | Fixed | Fixed an issue where traffic on the home page was not displayed while a job was running. |
| CDP & Replication | Fixed | Fixed an issue where the server takeover feature was still displayed when unauthorized. |
| CDP & Replication | Fixed | Fixed an issue where the number of CPU cores displayed during server takeover was incorrect. |
| CDP & Replication | Fixed | Fixed an issue where CPU adaptive mode was not enabled during takeover jobs. |
| CDP & Replication | Optimized | Optimized the takeover and rollback functionality, and added support for breakpoint and downgrade. |
| CDP & Replication | Optimized | Optimized the translation of volume descriptions in the server real-time job log. |
| CDP & Replication | Optimized | Optimized the default configuration for resource monitoring on Linux systems. |
| CDP & Replication | Optimized | Optimized the display of excessively long standby machine names. |
| CDP & Replication | Optimized | Optimized takeover performance for high-capacity disks. |
| CDP & Replication | Optimized | Added a log message stating “Preparing virtual machine” to the embedded job in takeover. |
| CDP & Replication | Optimized | Optimized the display of total job capacity during the real-time synchronization stage of rollback jobs. |
| CDP & Replication | Optimized | Optimized the progress description in the data consistency verification phase, changing it to "Verification Progress". |
| CDP & Replication | Optimized | Added a countdown prompt in the cache degradation log to restore the CDP mode. |
| CDP & Replication | Optimized | Optimized the operation prompts for replication jobs. |
| CDP & Replication | Optimized | Optimized the verification of required fields for the rollback communication IP when taking over a real-time backup/replication job. |
| CDP & Replication | Optimized | Optimized the loading performance of backup set verification objects. |
| CDP & Replication | Optimized | Added prompts for different verification methods. |
| CDP & Replication | Optimized | Optimized the search functionality at checkpoints, event information, and verification points during disk recovery and takeover jobs. |
| CDP & Replication | Optimized | Optimized the comment information for backup data in the replication feature. |
| CDP & Replication | Optimized | Optimized the interface prompts when no clients have been added, and added a shortcut to add clients. |
60-DAY FULL-FEATURED FREE TRIAL
- No credit card required
- Get started in 10 minutes